Panasonic WV-SP102E 사용자 설명서
40
40
41
Configure the settings of the servers [Server]
The settings relating to the mail server, the FTP server and the NTP server can be configured on this page.
The "Server" page has 3 tabs; the [Mail] tab, the [FTP] tab and the [NTP] tab.
The "Server" page has 3 tabs; the [Mail] tab, the [FTP] tab and the [NTP] tab.
Configure the settings relating to the mail server [Mail]
Click the [Mail] tab on the "Server" page. (☞ Pages 13 and 14: How to display/operate the setup menu)
The settings relating to the mail server used to send the alarm mail can be configured on this page.
The settings relating to the mail server used to send the alarm mail can be configured on this page.
Important:
• When a terminal that receives e-mails is not compatible with UTF-8 encode, it is impossible to receive alarm
mails correctly.
[SMTP server address]
Enter the IP address or the host name of the SMTP
server used to send e-mails.
Available number of characters: 1 - 128 characters
Enter the IP address or the host name of the SMTP
server used to send e-mails.
Available number of characters: 1 - 128 characters
[SMTP port]
Enter the port number to which e-mails are sent.
Refer to the help window to infomation about the
unavailable port number.
Available port number: 1 - 65535
Default: 25
Enter the port number to which e-mails are sent.
Refer to the help window to infomation about the
unavailable port number.
Available port number: 1 - 65535
Default: 25
[POP server address]
When "POP before SMTP" is selected for "Type", enter
the IP address or the host name of the POP server.
Available number of characters: 1 - 128 characters
When "POP before SMTP" is selected for "Type", enter
the IP address or the host name of the POP server.
Available number of characters: 1 - 128 characters
Important:
• When entering the host name for "SMTP server
address" or "POP server address", it is necessary to
configure the DNS settings on the [Network] tab of
the "Network" page. (☞ Page 45)
configure the DNS settings on the [Network] tab of
the "Network" page. (☞ Page 45)
[Type]
Select the authentication method to send e-mails from
the following.
None: It is not necessary to clear any authentication to
Select the authentication method to send e-mails from
the following.
None: It is not necessary to clear any authentication to
send e-mails.
POP before SMTP: It is necessary to first clear the
POP server authentication to use the SMTP server
to send e-mails.
to send e-mails.
SMTP: It is necessary to clear the SMTP server authen-
tication to send e-mails.
Default: None
Note:
• When you don't know the authentication method to
send e-mails, refer to the network administrator.
[User name]
Enter the user name to access the server.
Available number of characters: 0 - 32 characters
[Password]
Enter the password to access the server.
Available number of characters: 0 - 32 characters
Enter the password to access the server.
Available number of characters: 0 - 32 characters
[Sender's mail address]
Enter the mail address of a sender.
The entered mail address will be displayed in the
"From" (sender) line of the sent mails.
Available number of characters: 3 - 128 characters
Enter the mail address of a sender.
The entered mail address will be displayed in the
"From" (sender) line of the sent mails.
Available number of characters: 3 - 128 characters