Panasonic AK-HRP900P 사용자 설명서
17
The communication speed is factory-adjusted to 38.4Kpbs.
In case it does not match the communication speed of multi-purpose camera AK-HC900P,
the alarm LED is lighted. Remove the rear panel and change the DIP SW on the board
and adjust it to the communication speed of the camera.
In case it does not match the communication speed of multi-purpose camera AK-HC900P,
the alarm LED is lighted. Remove the rear panel and change the DIP SW on the board
and adjust it to the communication speed of the camera.
SW3
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
5 6 7 8
Change the
communication report
by the combination of
SW3 No.1 and No.2 on
ROP CPU board.
communication report
by the combination of
SW3 No.1 and No.2 on
ROP CPU board.
125Kbit/Sec
38.4Kbit/Sec
9600Kbit/Sec
SW5 SW4 SW3
Remove the
screw and open
the bottom
plate, then DIP
SW can be seen
in there.
screw and open
the bottom
plate, then DIP
SW can be seen
in there.
Communication Speed Setting