Q-See QD6002D 사용자 설명서

You can enter an identifying name for your camera that will appear over the video image if you 
so choose. This will appear in addition to any similar identification made using a DVR. You can 
enter two lines of text with up to 26 characters each. Currently, only one such identification 
field - CHR1 - is supported.

To enter text, use the multi-function button 
to navigate to the desired character and then 
press the button to enter it and the cursor 
will advance to the next position in the name. 
The arrow buttons will allow you to move the 
cursor within the camera name including to 
the next line. Spaces can be entered using 
the CLR button or the right arrow button.

Clicking on POS  will open a new window to allow you to position the name anywhere on the 
screen (space permitting). Simply move the name around the screen using the multi-function 
button. Clicking the multi-function button will return you to the ID setup window.

The camera is internally synchronized and this cannot be changed.

Select your preferred language; English, Spanish, French, Russian, Portuguese, German, 
Chinese and Japanese.

This allows you to reset the camera back to factory default settings.

IMPORTANT!  After  making  changes  to  the  settings,  select  SAVE  ALL  to 
retain these in the camera in the case of power failure.

No picture or unstable image

Check both the power and video 
connections to the camera.

The on-screen image is blurry.

1. Check the camera focus.
2. Check for fingerprints or dirt on the lens.
3. Check menu settings.

The on-screen image is dim.

1. Check for fingerprints or dirt on the lens.
2. Check monitor settings
3. Check camera SHUTTER/AGC settings.

The on-screen image is dark.

1. Adjust the monitor contrast settings.
2. Adjust camera SHUTTER/AGC settings.

The on-screen image color is incorrect.

Check camera WHITE BAL setting.

The on-screen image has a lot of noise.

1. Check camera Noise Reduction settings
2. Check camera auto gain setting in 
SHUTTER/AGC menu.

No motion detection or privacy frames.

Check whether those settings have been 
enabled.

The screen flickers.

Camera may be facing sun, television or 
computer monitor.

The IR LEDs will not light up

1. Check the power connection to the 
camera. 
2. Power supply may need to be located 
closer to camera.
3. Change DAY/NIGHT mode on camera to 
AUTO or B/W mode

The camera is not working properly, is hot, 
smells or is producing smoke.

DISCONNECT CAMERA FROM POWER 
SUPPLY IMMEDIATELY!
1. Check that correct power supply is in use.
2. Send camera out for repair.