Pelco 1104-080 사용자 설명서

 

20

C617M-A 8/04

 

The Record LED on the front panel indicates what the DVR is doing.

Recording:

Red (blinking)

Playback:

Green (steady)

Fast Playback:

Green (blinking)

Alarm Event Recording Enabled:

Yellow (steady)

Stop:

Off

 

If the Preview feature in the Camera menu is On, you can view live video on the monitor. Video is displayed full-screen only if one camera is 
turned on. If more than one camera is turned on, video is shown in a quad view.

If the Preview feature in the Camera menu is Off, you cannot view live video on the monitor.

 

  Automatic Recording in the Camera menu must be OFF.

1. Press and hold the Function button. The Function Key list appears. Keep holding the Function button.

2. Press buttons 1-6 to start or stop recording. Buttons 1-4 are toggle switches: if a camera is recording, pressing a button will stop recording; 

if a camera is not recording; pressing a button will start recording.

3. Release the Function button. Cameras set to record will record continuously until you repeat steps 1 and 2 and stop recording.

 

Scheduled recording allows you to program the DVR to turn on and off at specified times each day. This way you record only when you need to 
and can conserve hard disk drive space. When the hard disk drive is full, the DVR starts to overwrite the oldest data. 

 

  Turning off certain cameras does not save the video from those cameras. All turning off certain cameras does is provide more 

disk space to record other cameras. When the hard disk drive is full, the DVR will start overwriting the oldest video recorded.

Refer to 

 

 in the 

 

 section to set the start and stop times for recording.

If you need to stop recording a camera before the programmed end time, you must go back into the programming menus and turn off the auto-
matic recording for that camera.

FUNCTION KEY LIST

0 : Setup
1 : Camera 1 recording/stop
2 : Camera 2 recording/stop
3 : Camera 3 recording/stop
4 : Camera 4 recording/stop
5 : All the cameras recording
6 : All the cameras stop

: Alarm On
: Alarm Off