VIVOTEK IP8172 사용자 설명서

 

 

If 

Custom Camera (scanner) is selected as the PTZ driver, you will need to configure command 

buttons to control the PTZ scanner. Click

 Custom Command to open the Custom Command page 

to set the commands in the Control Settings session. Please refer to your PTZ scanner user's 

manual to enter the commands in the following fields. Click 

Save to enable the settings and click 

Close to exit the page. 

►The command buttons will be displayed on the main page:

►If you select DynaDome/SmartDOME, 

Lilin PIH-7x00, Pelco D, Pelco P, or 

Samsung  scc643 protocol as the PTZ 

driver, the 

Control Settings column 

will not be displayed.

►For  all  PTZ  drivers,  a  total  of  five 

additional command buttons can be 

configured.