VIVOTEK PD8136 사용자 설명서

 

 

On this page, you can tune the White balance and Image adjustment settings.

White balance: Adjust the value for the best color temperature.

■ Auto: The Network Camera automatically adjusts the color temperature of the light in response to 

different light sources. The white balance setting defaults to 

Auto and works well in most situations.

■ Fix current value

Follow the steps below to manually set the white balance to compensate for the ambient lighting 

conditions.

1. Set the White balance to 

Auto and click Save.

2. Place a sheet of white paper in front of the lens, (or a color of cool color temperature, such as blue), 

click the 

Off button, then allow the Network Camera to adjust the color temperature automatically.

3. Click the 

On button on the Fix Current Value to confirm the setting while the white balance is being 

measured.

4. Click 

Save to enable the new setting. 

Image Adjustment

■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.

■ Contrast: Adjust the image contrast level, which ranges from -5 to +5. 

■ Saturation: Adjust the image saturation level, which ranges from 0% to 100%. 

■ Sharpness: Adjust the image sharpness level, which ranges from 0% to 100%. 

■ Enable low light compensation: When selected, the camera will provide electronic gains during low 

light conditions. 

Sensor Setting 2: 

For special situations

Sensor Setting 1:

For normal situations