VIVOTEK PD8136 사용자 설명서

 

 

The reset button is used to reset the system or to restore the factory default settings. Sometimes 

resetting the system can return the camera to normal operation. If the system problems remain 

after reset, restore the factory settings and install again.

Reset: Press and release the recessed reset button with a paper clip or thin object. Wait for the 

Network Camera to reboot.

Restore: Press and hold the recessed reset button for a while to restore. Note that all settings 

will be restored to factory default. 

This network camera is compliant with 

SD/SDHC/SDXC 32GB, 64GB, and other preceding 

standard SD cards.

1 Steady 

Red

Power on and system booting

Red 

LED off

Power off

2 Steady 

Red 

+ blinking 

Green

 every 1 sec. (Green LED on 

for 1 sec and off for another)

Network heartbeat

Steady 

Red

 + 

Green

 LED off

Network disconnected

3 Blinking 

Red

 every 0.15 sec. + Blinking 

Green

 every 1 sec. 

(

Red

 LED on for 0.15 sec. and 

Green 

LED on for 1 sec. and 

off  for another)  

Upgrading firmware

4 Blinking 

Red

 every 0.15 sec. + blinking 

Green

 every 0.15 

sec. 

Restoring defaults