VIVOTEK IP8130 사용자 설명서

 

 

■ 

Authentication Mode: Choose one of the following modes� The default setting is “Open”�

Open – Communicates the key across the network�

Shared – Allows communication only with other devices with identical WEP settings�

■ 

Key length: The administrator can set the key length to 64 or 128 bits� 

The default setting is “64 bits”�

■ 

Key format: Hexadecimal or ASCII� The fault setting is “HEX”� 

HEX digits consist of the numbers 0~9 and the letters A-F�

ASCII is a code for representing English letters as numbers from 0-127 except “, <, > , and the 

space character which are reserved�

■ 

Network Key: Enter a key in either hexadecimal or ASCII format� 

You can select different key lengths, the acceptable input lengths are as follows:

64-bit key length: 10 Hex digits or 5 characters�

128-bit key length: 26 Hex digits or 13 characters�

► When 22(“), 3C(<), or 3E(>) are input as network keys, the key format cannot be changed to 

ASCII format�

When wireless configuration is done, click the 

Save button, disconnect the Ethernet 

cable and then 

reboot the camera (by disconnect and then connect the power cord)� The 

camera should then be connected over the wireless network. If successfully configured, 

the 

camera LED should turn 

 after 1 minute� If the camera LED does not turn Green 

within 2 minutes, check your wireless configuration for errors.