VIVOTEK IP8161 사용자 설명서

 

 

 

 

This section explains how to configure a wired network connection for the Network Camera.

LAN

Select this option when the Network Camera is deployed on a local area network (LAN) and is intended 

to be accessed by local computers� The default setting for the Network Type is LAN� Rememer to click 

Save when you complete the Network setting�

Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by 

the DHCP server each time the camera is connected to the LAN�

Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera� 

1� You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the Network 

    Camera on LAN� Please refer to Software Installation on page 10 for details�

2� Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP�

Subnet mask: This is used to determine if the destination is in the same subnet� The default value is

“255�255�255�0”�

Default router: This is the gateway used to forward frames to destinations in a different subnet� Invalid 

router setting will fail the transmission to destinations in different subnet�