VIVOTEK IP8152 사용자 설명서

 

 

Advanced Mode

This section explains how to configure the image settings of the Network Camera� It is 

composed of the following four columns: General settings, Image settings, Exposure, and 

Privacy mask�

Video title: Enter a name that will be displayed on the title bar of the live video as the picture shown 

below�

Show timestamp and video title in videos and snapshots: Select this checkbox if you prefer video 

title and time stamp to display in videos and snapshots� 

A zoom indicator will be displayed on the Home page when you zoom in/out on the live viewing 

window as shown below� You may zoom in/out on the image by scrolling the mouse wheel inside 

the live viewing window, and the maximum zoom in will be up to 12 times� 

Video Title

Title and Time

Video 17:08:56  2012/06/09

2012/06/09  17:08:56

Zoom Factor

Zoom In

Zoom Out

Color: Select to display color or black/white video streams.

Power line frequency: Set the power line frequency consistent with local utility settings to eliminate 

image flickering associated with fluorescent lights� Note that after the power line frequency is 

changed, you must disconnect and reconnect the power cord of the Network Camera in order for 

the new setting to take effect�

Video orientation: 

Flip--vertically reflect the display of the live video; Mirror--horizontally reflect 

the display of the live video� Select both options if the Network Camera is installed upside-down 

(e.g., on the ceiling) to correct the image orientation. Please note that if you have configured preset 

locations, those locations will be cleared after flip/mirror setting.