VIVOTEK MD8562 사용자 설명서

 

 

Advanced Mode

This section explains how to configure the image settings of the Network Camera. It is 

composed of the following four columns: General settings, Preference, Exposure, and Privacy 

mask.

Timestamp and video title: Enter a name that will be displayed on the title bar of the live video as the 

picture shown below.

Zoom factor: If you check this item, the zoom indicator will be displayed on the Home page when you 

zoom in/out the live viewing window as the picture shown below. You may zoom in/out the image by 

scrolling the mouse wheel inside the live viewing window. 

Video  2011/03/13 17:08:56

Title and Time

Video (TPC-AV)

Video Title

Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display

of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling)

to correct the image orientation. Please note that the preset locations will be cleared after flip/mirror.

Color: Select to display color or black/white video streams.

Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image 

flickering associated with fluorescent lights. Note that after the power line frequency is changed, you 

must disconnect and reconnect the power cord of the Network Camera in order for the new setting to 

take effect. 50Hz stands for PAL (Europe) and 60Hz stands for NTSC (US and other countries).