VIVOTEK SD7151 사용자 설명서

Follow the steps below to install the Network Camera to the ceiling:

1. Attach the alignment sticker to the wall.

2. Drill four pilot holes into the wall.

3. Attach the black cover to the Network Camera using the supplied four black screws.

4. Fix the dome cover to the Network Camera and secure it by rotating it clockwise.

5. Loosen the three screws on the front opening of the wall mount bracket.

6. Place the O-ring on the front opening of the wall mount bracket.

7. Feed the cables through the front opening of the wall mount bracket and pull them from wall 

    outlet.

8. Attach the Network Camera to the wall mount bracket by tightening the three screws on the 

    front opening of the wall mount bracket.

9. Fasten the wall mount bracket to the wall.