VIVOTEK SF8172 사용자 설명서

VIVOTEK

User's Manual - 9

DI/DO Diagram

Please refer to the following illustration

for the connection method.

Hardware Reset

The reset button is used to reset the system or restore the factory default settings. Sometimes

resetting the system can return the camera to normal operation. If the system problems remain

after reset, press the reset button longer to restore the factory settings and install again.

Reset: Press and release the recessed reset button with a straightened paper clip. Wait for the

Network Camera to reboot.

Restore: Press and hold the recessed reset button for at least several seconds to restore. Note

that all settings will be restored to factory defaults.

Micro SD/SDHC/SDXC Card Capacity

This network camera is compliant with

Micro SD/SDHC 32GB and other preceding standard SD

cards.

3.3V

Digital output

Power+3.3V

+3.3V

Digital input

Ground

GND

Camera Power

Input

Output

+12

VDC

Max.

VDC

Switch

BJT transistor

Relay

GND