JVC VN-C625 사용자 설명서
23
1-4 Installing the Camera
1.
Attach the safety wire to prevent the
camera from falling down
camera from falling down
As shown in the diagram, pull out the safety
wire from the ceiling mount and hang it to the
safety wire fastening hook on the camera.
Be sure to connect the safety wire to prevent
the camera from falling down.
wire from the ceiling mount and hang it to the
safety wire fastening hook on the camera.
Be sure to connect the safety wire to prevent
the camera from falling down.
2.
Check that the locking screw is loosened
The camera cannot be properly installed if the
locking screw of the ceiling mount is not
loosened.
locking screw of the ceiling mount is not
loosened.
3.
Fit the camera to the ceiling mount
Align the "^" mark of the camera unit with
"&" mark of the ceiling mount, and fit the
camera to the ceiling mount upon checking
the positions of the camera clamping bracket
as well as the locking screw on the ceiling
mount.
"&" mark of the ceiling mount, and fit the
camera to the ceiling mount upon checking
the positions of the camera clamping bracket
as well as the locking screw on the ceiling
mount.
• Do not connect cameras other than VN-
C625 to the ceiling mount. Doing so may
cause the camera to malfunction.
cause the camera to malfunction.
• Be sure to connect the safety wire.
Otherwise, the camera may fall to the
ground.
ground.
• Do not leave the camera hung with the
safety wire. The spring characteristic of the
safety wire will lose. It might not be able to
mount properly when inserting the camera
unit to the ceiling mount if the wire is
caught.
safety wire will lose. It might not be able to
mount properly when inserting the camera
unit to the ceiling mount if the wire is
caught.
Fastening Hook for Safety Wire
Safety Wire
Ceiling Mount
Locking Screw
Camera Clamping
Bracket
Camera
&Mark
Cautions
C625_p2-24
05.3.4, 6:22 PM
23