VIVOTEK 8332 사용자 설명서

 

 

This section explains how to configure the Network Camera to an Internet connection

. 

1. If you have external devices such as sensors and alarms, make the connection from the 

general I/O terminal block.

2. Use the supplied RJ45 female/female coupler to connect the Network Camera to a switch. 

Use a Category 5 Cross Cable when Network Camera is directly connected to PC.

3. Connect the power cable from the Network Camera to a power outlet.

There are several ways to set up the Network Camera over the Internet

. 

The first way is to set 

up the Network Camera behind a router

. 

The second way is to utilize a static IP

. 

The third way is 

to use PPPoE

.

Before setting up the Network Camera over the Internet, make sure you have a router and follow 

the steps below.

1. Connect your Network Camera behind a router, the Internet environment is illustrated below. 

Regarding how to obtain your IP address, please refer to Software Installation on page 12 for 

details.

POWER

COLLISION

LINK

RECEIVE

PARTITION

1

2

3

4

5

GND: Ground

DI: Digital Input

AC24V: 24V

AC24V: 24V