VIVOTEK IP32133 사용자 설명서
- 12 -
www.vivotek.com
T:
886-2-22404099
F:
886-2-22404097
When administrators choose “Use
this IP whenever system boots” or
fill any wireless network settings,
the local FTP server port and root
password of Network Camera will be
utilized. If they have been changed
prior to the installation, a
confirmation window will pop out to
request correct settings. After
entering the correct settings, press
“Retry”.
this IP whenever system boots” or
fill any wireless network settings,
the local FTP server port and root
password of Network Camera will be
utilized. If they have been changed
prior to the installation, a
confirmation window will pop out to
request correct settings. After
entering the correct settings, press
“Retry”.
If the “Server FTP Port” or “Server Root
Password” is lost, click “Cancel” to exit. In this
case, the IP address of Network Camera will
still be installed though it is not fixed for
further reboot. If the root password is correct,
administrator can log in to browse the correct
local FTP server port in the network settings.
Otherwise refer to Appendix A Troubleshooting
to restore factory default settings and then
use the installer to install again.
Password” is lost, click “Cancel” to exit. In this
case, the IP address of Network Camera will
still be installed though it is not fixed for
further reboot. If the root password is correct,
administrator can log in to browse the correct
local FTP server port in the network settings.
Otherwise refer to Appendix A Troubleshooting
to restore factory default settings and then
use the installer to install again.
Once installation is complete, administrators should proceed to the next
section "First access to Network Camera" for necessary checks and
configurations.