VIVOTEK IP32133 사용자 설명서
- 41 -
www.vivotek.com
T:
886-2-22404099
F:
886-2-22404097
users must type in the web browser “http://192.168.0.100:8080” instead of
“http://192.168.0.100”.
“http://192.168.0.100”.
Streaming
“Control channel port”, it can be other than default port 5001 to cooperate with the
port opened by the firewall.
“Audio channel port”, it can be other than default port 5002 to cooperate with the
port opened by the firewall.
“Video channel port”, it can be other than default port 5003 to cooperate with the
port opened by the firewall.
“Improve audio quality in low bandwidth environment”, if Network Camera
works in versatile or low network bandwidth environment, users can check this option
to improving audio quality by sacrificing some real-time synchronization.
port opened by the firewall.
“Audio channel port”, it can be other than default port 5002 to cooperate with the
port opened by the firewall.
“Video channel port”, it can be other than default port 5003 to cooperate with the
port opened by the firewall.
“Improve audio quality in low bandwidth environment”, if Network Camera
works in versatile or low network bandwidth environment, users can check this option
to improving audio quality by sacrificing some real-time synchronization.
WLAN Configuration
“SSID” (Service Set Identifier), it is a name that identifies a wireless network. Access
Points and wireless clients attempting to connect to a specific WLAN (Wireless Local
Area Network) must use the same SSID. The default setting is default. Note: The
maximum length of SSID is 32 single-byte characters and SSID can’t be any of “, <, >
and space character.
“Wireless mode”, clicking on the pull-down menu to select from the following
options:
“Infrastructure” – connecting the WLAN via an Access Point. (The default setting)
“Ad-Hoc” – connecting directly to a host equipped with a wireless adapter in a
peer-to-peer environment.
“Channel”, while in infrastructure mode, the channel is selected automatically to
match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel
must be manually set to the same channel for each wireless adapter. The default
channel setting depends on the installed region.
“TX rate”, to select the maximum transmission rate on the network. 22Mbps is the
default setting.
Points and wireless clients attempting to connect to a specific WLAN (Wireless Local
Area Network) must use the same SSID. The default setting is default. Note: The
maximum length of SSID is 32 single-byte characters and SSID can’t be any of “, <, >
and space character.
“Wireless mode”, clicking on the pull-down menu to select from the following
options:
“Infrastructure” – connecting the WLAN via an Access Point. (The default setting)
“Ad-Hoc” – connecting directly to a host equipped with a wireless adapter in a
peer-to-peer environment.
“Channel”, while in infrastructure mode, the channel is selected automatically to
match the channel setting for the selected Access Point. In Ad-Hoc mode, the channel
must be manually set to the same channel for each wireless adapter. The default
channel setting depends on the installed region.
“TX rate”, to select the maximum transmission rate on the network. 22Mbps is the
default setting.