VIVOTEK H.264 사용자 설명서

VIVOTEK

8 - User's Manual

Network Deployment

Setting up the Network Camera over the Internet

This section explains how to configure the Network Camera to an Internet connection

�

1. If you have external devices such as sensors and alarms, make connections from the general

I/O terminal block�

2. Use the supplied RJ45 female/female coupler to connect the Network Camera to a switch.

Use a Category 5 Cross Cable when Network Camera is directly connected to PC�

3� Connect the power cable from the Network Camera to a power outlet�

There are several ways to set up the Network Camera over the Internet

�

The first way is to set

up the Network Camera behind a router

�

The second way is to utilize a static IP

�

The third way is

to use PPPoE

�

Internet connection via a router

Before setting up the Network Camera over the Internet, make sure you have a router and follow

the steps below�

1� Connect your Network Camera behind a router, the Internet environment is illustrated below�

details�

AC24V: 24V

DI: Digital Input

GND: Ground

AC24V

AC24V
DI
GND

POWER

COLLISION

LINK

RECEIVE

PARTITION