VIVOTEK FD7141(V) 사용자 설명서

 

 

 

 

Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option to 

allow the Network Camera to open ports on the router automatically so that video streams can be sent 

from the LAN. To utilize this feature, make sure that your router supports UPnP

TM

 and it is activated�

PPPoE (Point-to-point over Ethernet)

Select this option to configure your Network Camera to make it accessible from anywhere with an 

Internet connection. Note that to utilize this feature, it requires an account provided by your ISP.

 

Follow the steps below to acquire your Network Camera’s public IP address�

1� Set up the Network Camera on the LAN�

2. Go to Home > Configuration > Application > Server Settings (please refer to Server Settings on page 

    73) to add a new email or FTP server�

3. Go to Configuration > Application > Media Settings (please refer to Media Settings on page 76)� Select 

System log so that you will receive the system logs in TXT file format which contains the Network 

Camera’s public IP address on your email or FTP server�

4. Go to Configuration > Network > Network Type. Select PPPoE and enter the user name and password 

provided by your ISP� Click 

Save to enable the setting�

5� The Network Camera will reboot�

6� Disconnect the power to the Network Camera; move it from the LAN environment�

► If the default ports are already used by other devices connected to the same router, the Network 

Camera will select other ports for the Network Camera�

► If UPnP

TM

 is not supported by your router, you will see the following message:

     

    

Network Camera (192.168.5.151)