VIVOTEK FD8156 사용자 설명서

 

 

Before setting up the Network Camera over the Internet, make sure you have a router and follow 

the steps below.

1. Connect your Network Camera behind a router, the Internet environment is illustrated below. 

Regarding how to obtain your IP address, please refer to Software Installation on page 16 for 

IP address : 192.168.0.3
Subnet mask : 255.255.255.0
Default router : 192.168.0.1

IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default router : 192.168.0.1

LAN (Local Area Network)
Router IP address : 192.168.0.1

WAN (Wide Area Network )
Router IP address : from ISP

Cable or DSL Modem

POWER

COLLISION

LINK

RECEIVE

PARTITION

1

2

3

4

5

Internet

2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is 

    192.168.0.3, please forward the following ports for the Network Camera on the router.

■ HTTP port: default is 80

■ RTSP port: default is 554

■ RTP port for audio: default is 5558

■ RTCP port for audio: default is 5559

■ RTP port for video: default is 5556

■ RTCP port for video: default is 5557

If you have changed the port numbers on the Network page, please open the ports 

accordingly on your router. For information on how to forward ports on the router, please refer 

to your router’s user’s manual.

3. Find out the public IP address of your router provided by your ISP (Internet Service Provider). 

    Use the public IP and the secondary HTTP port to access the Network Camera from the 

For example, your router and IP settings may look like this:

Device

IP Address: internal 

port

IP Address: External Port (Mapped port on the 

router)

Public IP of router

122.146.57.120

LAN IP of router

192.168.2.1

Camera 1

192.168.2.10:80

122.146.57.120:8000

Camera 2

192.168.2.11:80

122.146.57.120:8001

...

...

...