VIVOTEK FD8156 사용자 설명서

 

 

                           
This section explains how to configure the image settings of the Network Camera. It is 

composed of the following five columns: General settings, Image settings, Exposure, 

Focus, and Privacy mask.

Video title

Show_timestamp_and video_title_in_video_and_snapshots: Enter a name that will be displayed on 

the title bar of the live video as the picture shown below.

Video Title

2014/02/09  17:08:56

Title and Time

Video 17:08:56  2014/02/09

Position of timestamp and video title on image: Select to display time stamp and video title on the 

top or at the bottom of the video stream. 

Timestamp and video title font size: Select the font size for the time stamp and title. 

Color: Select to display color or black/white video streams.

Power line frequency: Set the power line frequency consistent with local utility settings to eliminate 

image flickering associated with fluorescent lights. Note that after the power line frequency is 

changed, you must disconnect and reconnect the power cord of the Network Camera in order for 

the new setting to take effect.

Video orientation: Flip - vertically reflect the display of the live video; Mirror - horizontally reflect the 

display of the live video. Select both options if the Network Camera is installed upside-down (e.g., 

on the ceiling) to correct the image orientation. Please note that if you have preset locations, those 

locations will be cleared after flip/mirror setting.