Bosch NDN-832 사용자 설명서

en | Safety

FlexiDomeHD 1080p IP Camera

AM18-Q0601 | v1.0 | 2012.01

Installation Manual

Bosch Security Systems

The yellow/green safety (power) ground wire from the camera 

must be connected to the system earth of the installation.

U.S.A.: - section 810 of the National Electrical Code, ANSI/NFPA 

No.70, provides information regarding proper grounding.

12 VDC / 24 VAC power source: This unit is intended to 

operate with a limited power source. The unit is intended to 

operate at either 12 VDC or 24 VAC (if PoE is not available). 

User supplied wiring must be in compliance with electrical 

codes (Class 2 power levels). 

PoE: Use only approved PoE devices. Power-over-Ethernet can 

be connected at the same time as a 12 VDC or 24 VAC power 

supply. 

If auxiliary power (12 VDC or 24 VAC) and PoE is applied 

simultaneously, the camera selects auxiliary input and shuts off 

the PoE.

The type label is located on the rear of the camera module.