Bosch 100 사용자 설명서

en | Analog Camera Firmware Updates via the CTFID

F.01U.097.269 | 4.0 | 2012.02

Firmware Update Manual

Bosch Security Systems, Inc.

2.4.2

Uploading an AutoDome 600 or MIC Series 550 Service Pack

The firmware upgrade process requires updates to one or all of the following files:

The next sections contain information and instructions you need before upgrading an

AutoDome 600 or a MIC Series 550 with the CTFID application.

2.4.3

Order to Upload Files

There is a specific order in which service pack files must be uploaded to the camera. Before

starting a firmware upgrade, note the current firmware version of your camera listed in the

CTFID Device Information window.

Use the following file order to upload firmware to the AutoDome:

SC Boot: You must first upload the SC Boot file if the service pack contains a version of

the file greater than the installed version. The boot files are stored in a separate Boot

directory. Always check for and install this file before before installing the System

Configuration (SC) Main file.

Note: The SC Boot upload process erases the resident SC Main components, which

completely disables the AutoDome. When you upload the SC Boot files the CTFID

displays a message notifying the installer that the SC Main files must be reinstalled.

G5 Main, MIC Main: Upload this file after uploading the SC Boot file. If the service pack

does not contain an SC Boot update, you should upload the G5 Main file first.

FPGA: This file is uploaded along with the G5 Main or MIC Main file.

Language: Certain service packs include an optional language upgrade file used to update

the camera’s on-screen display menus. Upload this firmware file last.

File Name

Function

SCBootApp.g4i

Updates the system controller boot firmware.

G5Main.g4i

MICMain.g4i

Updates the system controller firmware.

FPGA_SC.g4i

Updates the FPGA chip.

FPGA_VCA.g4i

Updates the FPGA chip.

VCA_boot.g4i

Updates PTZ camera Video Content Analysis firmware. Install this file during

the installation of the SCBoot.g4i file.

VCA_app.g4i

Updates PTZ camera Video Content Analysis firmware. Install this file during

the installation of the SCMain.g4i file.

language_Lang

Uploads an additional language file for the AutoDome on-screen display

menus.