Canon 2812B015 사용자 설명서

Det

ai

led Set

tings

(1) [Password]

Set the Administrator password. You can use up to eight (single-byte) ASCII characters 

(space or printable characters). The factory setting is "VB-C60." If Admin Viewer or VBAdmin 

Tools is connected, change the password after terminating the connection. 

(2) [Confirm Password]

Enter the same password for confirmation.

You can set the following items.

z Administrator Password

Set the Administrator password.

z LAN

Set the IP address and other items needed to establish LAN connection.

z IPv6

Set IPv6.

z DNS

Set the name server address, host name and DDNS.

z SNMP

Set the SNMP.

z Be sure to change the default Administrator password to ensure security of the system. 

Don't forget the new password.

z If you have forgotten the Administrator Password, press the reset switch to initialize the 

settings. See "Initializing with the Reset Switch on the Camera" (  P. 5-21). Take note, 

however, that this will reset all settings of the camera, except for time and date, to their 

factory settings.