Petsafe Extra Receiver 사용자 설명서
www.petsafe.net 3
Prepare the Receiver Collar
Your Receiver Collar comes with short Contact Points installed. Use the long
Contact Points for cats with long or thick hair. Tighten the Contact Points with
pliers one-half turn beyond finger tight (A). Check the tightness weekly.
Contact Points for cats with long or thick hair. Tighten the Contact Points with
pliers one-half turn beyond finger tight (A). Check the tightness weekly.
To Insert and Remove the Batteries
1. With a coin, unlock the Battery Door and remove it (B).
2. Insert two 3-volt Lithium (CR2032 batteries) into the Battery Door (B).
3. Place the Battery Door back into the Receiver (C).
4. With a coin, slide Battery Door latch to lock it (C).
2. Insert two 3-volt Lithium (CR2032 batteries) into the Battery Door (B).
3. Place the Battery Door back into the Receiver (C).
4. With a coin, slide Battery Door latch to lock it (C).
Replacement batteries (3-volt, CR2032) can be found at many retailers. Contact
the Customer Care Centre or visit our website at www.petsafe.net for a list of
common retailers.
the Customer Care Centre or visit our website at www.petsafe.net for a list of
common retailers.
3
3
2
A-67
4
1
2
5
A
C
B