Sony PS-LX300USB 사용자 설명서

PS-LX300USB.GB.3-198-123-12(1)

Carefully place the platter on the 
spindle.

Using the ribbon, loop the drive belt 
around the motor pulley.

After looping the belt, do not forget to 

remove the ribbon.

Place the rubber mat on the platter.

When the AC power cord is plugged after assembling or 

moving the turntable, the turntable sometimes rotates 

and the tone arm descends to the platter even if START 

is not pressed. 

If this occurs, press STOP to return the tone arm to the 

arm stand.

With the dust cover fully opened, grasp both 

sides of the cover, then remove it carefully.

You can use the turntable leaving the dust cover removed. 

In that case, store the cover correctly.

Insert the hinge pockets on the dust cover into 

the hinges on the rear of the cabinet.

Hinge pocket

Hinge