JVC KD-AVX11 사용자 설명서

EXTERNAL DEVICES

ENGLISH

Operate the target Bluetooth device.

Enter the same PIN code (as entered in the above
step) on the device to be connected.

Now connection is established and you can use the
device through the unit.

The device remains registered even after you
disconnect the device. Use <Connect> (or activate
<Auto Connect>) to connect the same device
from next time. (☞ pages 45 and 46)

Searching for available devices

Perform steps 1 to 3 on page 22, then...

The unit searches for available devices and displays
the list of them. (If no available device is detected,
“Device Unfound” appears.)

Select a device you want to connect.

Enter the specific PIN code of the device to

the unit.
• Refer to the instructions supplied with the device

to check the PIN code.

Use the Bluetooth device to connect.

Now connection is established and you can use the
device through the unit.

NEW DEVICE

Dial Menu
Message

Open

Search

Special Device

NEW DEVICE

Dial Menu
Message

Open
Search

Special Device

Connecting a special device

Perform steps 1 to 3 on page 22, then...

The unit displays the list of the preset devices.

Select a device you want to connect.

Use <Open> (or <Search>) to connect.

Connecting/disconnecting a registered
device

Select “Bluetooth Phone” or “Bluetooth

Audio,” then select a registered device you
want to connect/disconnect.

Perform steps

2 and 3 on page 22, then...

• Select <Connect> to connect the selected

device.

• Select <Disconnect> to disconnect the selected

device.

You can set the unit to connect a Bluetooth device
automatically when the unit is turned on. (☞ page
46)

EN_KD-AVX11J-f.indb 23

06.12.21 3:29:15 PM