StarTech.com RACKCONS1708 사용자 설명서

Instruction Manual

10

1.  To test that the console is working properly, perform the following steps:
2.  Power up the LCD Rack drawer, and then turn on your computer.
3.  Make sure the video image is centered within the screen area. Use the OSD controls 

to adjust the image (see Panel controls and OSD functions) or press the Auto button 

on the right hand side of the monitor.

Note: You can adjust the horizontal and vertical position, contrast, and brightness 

to better suit your video card and your personal preference.Before you begin, make 

sure that power to all of the devices you will be connecting to the console have been 

turned off. To prevent damage to your installation due to ground potential difference, 

make sure that all of the devices being installed are properly grounded. Once all 

peripherals have been connected, please power them on.

The following controls are located on the console monitor:

Press the Auto tune button. The panel will adjust the display size automatically and 

also tune the panel to its optimized state.

Soft power on/off. Adjacent LED is lit when on

Auto

Auto-synchronize and scale down display to any valid factory 

preset timings

Up

Press to scroll to the function you want to adjust.

Down

Press to scroll to the function you want to adjust

Menu

To access the main menu. This button also acts as the Enter 

button.