Husqvarna 346XP E-tech 사용자 설명서
English – 39
TECHNICAL DATA
Technical data
Recommended original and replacement bar and chain combinations
The following is a list of recommended cutting equipment for chain saws 346XP, 346XPG, 346XP E-tech, 346XPG E-
tech TrioBrake et 353, 353G, 353 E-tech, 353G E-tech, TrioBrake. The combinations of power head, bar and chain have
been investigated in accordance with the kickback and vibration requirements of ANSI B175.1–2000.
tech TrioBrake et 353, 353G, 353 E-tech, 353G E-tech, TrioBrake. The combinations of power head, bar and chain have
been investigated in accordance with the kickback and vibration requirements of ANSI B175.1–2000.
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
corresponding maximum nose radius of a solid bar.
The following list is the chain saw manufacturers recommendations. There may be other combinations available, which
will also achieve kickback reduction.
will also achieve kickback reduction.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy. A hard nose bar having the same length and nose
radius as a sprocket-nose bar may be considered to have equivalent or less kickback energy than the sprocket-nose bar.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy. A hard nose bar having the same length and nose
radius as a sprocket-nose bar may be considered to have equivalent or less kickback energy than the sprocket-nose bar.
346XP/XPG/E-tech/Triobrake 353/G/E-tech/Triobrake
Motor
Cylinder displacement, cu.in/cm
3
3,06/50,1
3,15/51,7
Cylinder bore, inch/mm
1,74/44,3
1,77/45
Stroke, inch/mm
1,28/32,5
1,28/32,5
Idle speed, rpm
2700
2700
Power, kW/ rpm
2,7/9600
2,4/9000
Ignition system
Spark plug
NGK BPMR 7A/ Champion RCJ
7Y
7Y
NGK BPMR 7A/ Champion RCJ
7Y
7Y
Electrode gap, inch/mm
0,02/0,5
0,02/0,5
Fuel and lubrication system
Fuel tank capacity, US pint/litre
1,06/0,5
1,06/0,5
Oil pump capacity at 9,000 rpm, ml/min
5-12
5-12
Oil tank capacity, US pint/litre
0,59/0,28
0,59/0,28
Type of oil pump
Automatic
Automatic
Weight
Chain saw without bar or chain, empty tanks, lb/kg
346XP: 5,1
353: 5,2
346XPG: 5,2
353G: 5,3
346XP E-tech: 5,1
353 E-tech: 11,0/5,0
346XPG: 5,2
353G E-tech: 5,3
Chain/bar
Standard bar length, inch/cm
13"/33
13"/33
Recommended bar lengths, inch/cm
13-20"/33-50
13-20"/33-50
Usable cutting length, inches/cm
12-19"/31-48
12-19"/31-48
Pitch, inch/mm
0,325/8,25
0,325/8,25
Thickness of drive links, inch/mm
0,050/1,3
0,050/1,3
0,058/1,5
0,058/1,5
Drive sprocket type/teeth
Rim/7
Rim/7
Chain speed at max. power, m/sec
18,5
17,3