Lexicon Part #070-13234 사용자 설명서

To adjust contrast, use SELECT to highlight CONTRAST ADJUSTMENT,
and ▲  or ▼  to set the contrast of the display to its maximum as seen from
your listening position.

Depending on the location of the DC-1 in your room, you may need to adjust
the front panel display contrast for optimum viewing. To do this, press the
▲

, ▼ or SELECT buttons on the Remote to enter the Main Menu.  Press ▼

twice to select DISPLAY ADJUST.

Press SELECT to highlight the Display Adjust Menu. Press  ▼ to select
FRONT PANEL DISPLAY.

If you want to turn the front panel display off, use SELECT to highlight
STATUS, then use ▲  or ▼  to select ALWAYS OFF.  With software Version
4, you can select 2 SECONDS which will cause the display to shut off
automatically two seconds after a command is received.

Press DONE twice to return to the main menu.

In addition to the front-panel display, the DC-1 contains a character genera-
tor for a video overlay display on monitors. Since the on-screen display is
capable of showing the full menu of options available at any point, calibra-
tion of the system is faster and easier if the DC-1

video output is connected

to a video monitor.

Adjustments to the on-screen display are made from the Display Adjust
menu. To display this menu, press the  ▲, ▼ or SELECT buttons on the
Remote to enter the Main Menu.  Press ▼ twice to select DISPLAY ADJUST.

Press SELECT to enter the Display Adjust menu. Press SELECT to open the
On-Screen Display menu.