Jonsered GC 2125 사용자 설명서

English

 – 11

•

Position the handle on the shaft. Note that the handle 
must be mounted below the arrow on the shaft.

•

Fit the screw, securing plate and wing nut as shown in the 
diagram.

•

Tighten the wing nut.

•

Clip the loop handle onto the shaft. Note that the loop 
handle must be fitted between the arrows on the shaft.

•

Slide the spacer into the slot in the loop handle.

•

Fit the nut, washer and screw.

•

Now adjust the trimmer to give a comfortable working 
position. Tighten the bolt/knob.

•

Clip the loop handle onto the shaft. Note that the loop 
handle must be fitted between the arrows on the shaft.

•

Slide the spacer into the slot in the loop handle.

•

Fit the nut, knob and screw. Do not overtighten.

•

Attach the J-handle to the loop handle using the three 
screws, as shown.

•

Now adjust the trimmer to give a comfortable working 
position. Tighten the bolt/knob.