Jonsered GC 2125 사용자 설명서

 

8

 

 – 

 

English

 

This guard is intended to pre

 

vent loose objects from being 

thrown towards the operator. The guard also protects the 
operator from accidental contact with the cutting attachment.

Check that the guard is undamaged and not cracked. Replace 
the guard if it has been exposed to impact or is cracked.

Always use the recommended guard for the cutting 
attachment you are using. See chapter on Technical data.

 

Y

 

our machine is equipped with a vibration damping system 

that is designed to reduce vibration and make operation 
easier.

Use of incorrectly wound cord or an incorrect cutting 
attachment increases the level of vibration. See instructions 
under the heading Cutting equipment.

The machine

 

′

 

s vibration damping system reduces the transfer 

of vibration between the engine unit/cutting equipment and 
the machine

 

′

 

s handle unit.

Regularly check the vibration damping units for cracks or 
deformation.

Check that the vibration damping element is undamaged and 
securely attached.

 

The m

 

uffler is designed to keep noise levels to a minimum 

and to direct exhaust fumes away from the user. A muffler 
fitted with a catalytic converter is also designed to reduce 
harmful exhaust gases.

In countries that have a warm and dry climate there is a 
significant risk of fire. We therefore fit certain mufflers with a 
spark arrestor screen. Check whether the muffler on your 
machine is fitted with this kind of screen.

For mufflers it is very important that you follow the instructions 
on checking, maintaining and servicing your machine.

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the 
machine.