Zenoah BC251 사용자 설명서
GB-8
BC251
6. Set up
INSTALLING HANDLE
• Mount the handle to the shaft tube and clamp it at a
• Mount the handle to the shaft tube and clamp it at a
location that is comfortable to you.
(1)
INSTALLING CUTTING ATTACHMENT GUARD
• Attach the cutting attachiment guard with the bolts
• Attach the cutting attachiment guard with the bolts
provided while inserting the spacer between the guard
and the pipe.
and the pipe.
• Attach the guard skirt on the guard.
INSTALLING CUTTING HEAD
1. Remove the plastic tube that is attached to the gear
1. Remove the plastic tube that is attached to the gear
shaft.
2. Firmly screw the line head assembly onto the gear
shaft by hand while locking the gear shaft by insert-
ing the tool into the upper holder on the gear box. Do
not use a metal blade on the model.
ing the tool into the upper holder on the gear box. Do
not use a metal blade on the model.
(1) About 28cm (11 inches)