Land Pride RCF2784 사용자 설명서

12/15/15

1.

Attach tailwheel A-frame (#1) to inside of rear deck 
lugs with 5/8"-11 x 2" GR5 cap screws (#2A), and hex 
nylock nuts (#5). Draw nylock nut up snug, do not 
tighten.

2.

Install two 2 1/4" OD machine washers (#6A & #6B) 
onto tailwheel spindle (#9).

3.

Insert tailwheel spindle (#9) into pivot tube of 
A-frame (#1) and install machine washer (#6C) 
over tailwheel spindle. Secure tailwheel with 

3/8" x 2 1/2" roll pin (#8).

4.

Attach bottom hole of tailwheel adjustment bar (#3) to 
deck rear with 5/8"-11 x 2" GR5 cap screw (#2C), and 
hex nylock nut (#5). Draw nylock nut up tight, do not 
torque tight.

5.

Attach tailwheel adjustment bar (#3) to A-frame (#1) 
with 5/8"-11 x 2" GR5 cap screw (#2B), spring lock 
washer (#7), and hex nut (#4). Tighten hex nut until 
lock washer (#7) is squeezed flat.

33266