Agri-Fab 2468 사용자 설명서

18

3.  If storing in an unventilated or metal storage shed, 

coat metal parts with light oil or silicone to prevent 
rust.

4.  Store unit in a clean, dry area.

1.  Clean the engine and the entire unit thoroughly.
2.  Refer to engine manual for correct engine storage 

instructions.

1.  Disconnect the spark plug wire and move wire away 

from the spark plug.

2.  Remove the access plate by removing two hex lock 

nuts. See figure 30.

3.  Locate one of the chipper blades in the access plate 

opening by rotating the impeller assembly by hand. 
Remove the blade using a 3/16" allen wrench on 
the outside of the blade and a 1/2" wrench on the  
impeller assembly, inside the housing.

4.  Remove the other blade in the same manner.
5.  Replace or sharpen blades. If sharpening, make 

certain to remove an equal amount from each blade. 
Reassemble in reverse order.

NOTE:  Make certain the blades are reassembled with 
the sharp edge facing upward, as viewed from the access 
plate opening.