Echo PB-755S T 사용자 설명서

Never perform maintenance or assembly procedures with engine 

running or serious personal injury may result.

  1.  Place guide loop (G) across large clamp, and turn until clip fully 

engages clamp band.

Clamp with cable guide loop (G) fits large end of flexible pipe (B).

  2.  Assemble clamps (A) onto both ends of flexible pipe (B).

 

  3.  Assemble flexible pipe (B) to elbow (D) on blower. Position 

guide loop (G) on inside (blower side) of flexible tube and tighten 

clamp (A).

A light lubricant may be used to ease assembly of flexible pipe to 

blower elbow.

Hang handle freely from blower to assure throttle cable is not 

twisted before installing handle (E). 

  4.  Position cable between the elbow (D) and frame and along the top 

of the flexible pipe. Loosen knob (H) on handle (E). Align notch 

in handle with tabs (F). Install onto swivel pipe (C) past long 

ridges in pipe.

  5.  Assemble swivel pipe (C) into flexible pipe (B) and tighten clamp 

(A).

 

  6.  Clip throttle cable into throttle cable guide loop (G).

  7.  Move handle (E) to desired position. Tighten knob (H) hand tight. 

  8.  Assemble straight pipe (I) onto swivel pipe (C), until you feel 

light resistance. Do not force connection. Hold swivel pipe and 

turn straight pipe clockwise, engaging positive locking channels, 

until connection is firm. Do not force connection.

  9.  Assemble straight pipe with decal (J) to straight pipe (I) as in step 

8.

Blower use will eventually loosen pipe connections. Exclusive 

positive locking system allows pipes to be tightened. If loosening 

occurs, remove two straight pipes and install according to instruc-

tions 8 & 9.