Billy Goat AET48 사용자 설명서

 

 

Part No 361277

 

 

        

Form No F061311D 

 

4

PACKING CHECKLIST 
 

 
Your Billy Goat is shipped from the factory in one carton. 

 
 
 
 
 
 
 
 
 
 
 

ASSEMBLY 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

READ all safety instructions before assembling unit. 
TAKE CAUTION

 

when removing the unit from the box.

 

1. Assemble the machine. See page 11 for parts illustration. Assembly hardware will be located in the parts bag. 
2. First attach the two frames together (item 1) with the hardware (items 31,32, and 35). 
3. Grease the shafts on the wheel assemblies. Then attach the wheel assemblies to the frame by sliding them in the 
collars on the front side of the frame. Then secure them in place with the snap rings (item 22). 
4. Attach the hitch assembly and braces (items 9 and 10) to the frame with the hardware (items 31, 32, 33, 34, 35, 
and 36). 
5. Attach the machine to a suitable hitch using the pin (item 15) and hitch pin (item 16). 
6. Place water tanks or weights in the designated positions the unit and secure them with a strap. DO NOT overload 
this machine with weights. 
7. Secure the lift rod before aerating. 

Boxing Parts 
Checklist 
      

 

Warranty card P/N- 400972, Owner’s Manual P/N-361277, Loose Parts Bag P/N-
361148, General Safety and Warnings Manual P/N-100295 

To secure, place rod into groove 
with the pin resting between the 
frame