Husqvarna H354SG 사용자 설명서
5
ASSEMBLY
HANG SUPPORT ASSEMBLY ON
REAR DRAWBAR (See Fig. 1)
REAR DRAWBAR (See Fig. 1)
1. Slide fl anges of support assembly into drawbar slots
fi rst, then, pivot backwards inserting pin into drawbar
pin hole.
pin hole.
2. Be sure support assembly is seated properly, then
secure with retainer spring.
1
2
MOUNTING COVER ASSEMBLY TO
SUPPORT ASSEMBLY (See Fig. 2)
NOTE: For ease of assembly, you may wish to obtain the
assistance of another person for mounting cover assembly
to tractor.
1. Position cover assembly on ground behind tractor.
2. Lift and rotate cover to align cover brackets with support
assistance of another person for mounting cover assembly
to tractor.
1. Position cover assembly on ground behind tractor.
2. Lift and rotate cover to align cover brackets with support
assembly tubes.
3. Slide cover assembly down onto the support tubes.
FIG. 2
03024
COVER
ASSEMBLY
ASSEMBLY
SUPPORT
ASSEMBLY
ASSEMBLY
02543
FIG. 1
INSERT
FLANGES
FIRST INTO
DRAWBAR
SLOTS
FLANGES
FIRST INTO
DRAWBAR
SLOTS
SUPPORT
ASSEMBLY
ASSEMBLY
DRAWBAR SLOTS
RETAINER
SPRING
SPRING
PIN
02
051
020
51
0
2
0
5
1
DRAWBAR
PIN HOLE
PIN HOLE