Grizzly H6239 사용자 설명서
Introduction
The Model H6239 10 Ton Log Splitter (
Figure 1)
features 10 tons of pressure for splitting firewood,
a 17
a 17
5
⁄
8
" log capacity, an 8
1
⁄
4
"
ram stroke, and two
built-in mini wheels for easy mobility.
Inventory
A. Log Splitter ................................................ 1
B. Handles ...................................................... 2
Figure 1. Model H6239 handles installed.
This log splitter is only intended to be used
to split logs! Serious injury may occur if this
log splitter is used as a hydraulic press.
to split logs! Serious injury may occur if this
log splitter is used as a hydraulic press.
The Model H6239 is a
heavy machine (106 lbs.
shipping weight). DO
NOT over-exert yourself
while unpacking or mov-
ing your machine—get
assistance.
Wear ANSI approved safety glasses and
gloves at all times.
gloves at all times.
Figure 2. Model H6239 identification.
Advance
Pump
Handle
Splitting
Pump
Handle
Wedge
Release
Knob
Cradle
Piston
Rod
Keep hands and other body parts away
from wedge and piston rod when H6239 is
in operation to prevent serious injury. Keep
area around log splitter clear of bystanders
to prevent injury from ejected wood pieces.
from wedge and piston rod when H6239 is
in operation to prevent serious injury. Keep
area around log splitter clear of bystanders
to prevent injury from ejected wood pieces.
Assembly
Insert a handle into each socket (
Figure 1).
Operation
1. Cut the logs you want to split to 17
5
⁄
8
" or less
to fit into the splitter.
2. Turn the release knob (Figure 2) counter-
clockwise to retract the piston rod fully into
the cylinder, then turn the knob clockwise.
the cylinder, then turn the knob clockwise.
10 TON LOG SPLITTER
MODEL H6239
INSTRUCTION SHEET
Sockets