Snapper ZT3000 사용자 설명서
Simplicity / Snapper ZTR
8/2007
13
TP 300-7337-01-CH-SMN
Suspension Adjustment
(select models)
The shock assembly can be adjusted to vary the amount
of pre-load applied to the springs. This allows the
operator to customize the ride according to operator’s
weight and operating conditions.
of pre-load applied to the springs. This allows the
operator to customize the ride according to operator’s
weight and operating conditions.
LESS PRE-LOAD:
• Light operator weight
• Softer, more cushioned ride
• Best for relatively flat terrain
MORE PRE-LOAD:
• Heavy operator weight
• Stiffer, more rigid ride
• Better handling and greater stability on hilly terrain
TO ADJUST THE SPRING PRE-LOAD:
1. Park machine on a flat, level surface. Disengage the
PTO, stop the engine and engage the parking brake.
2. See Figure 15. Turn the pre-load adjustment collar
(A) CLOCKWISE to increase the pre-load, turn
COUNTER-CLOCKWISE to decrease the pre-load.
Make sure both front shocks are set to the same
amount of pre-load. Make sure both rear shocks are
set to the same amount of pre-load.
COUNTER-CLOCKWISE to decrease the pre-load.
Make sure both front shocks are set to the same
amount of pre-load. Make sure both rear shocks are
set to the same amount of pre-load.
NOTE: After adjusting the front shock assembly, move
the ring against the adjustment collar to prevent the
collar from loosening during operation.
the ring against the adjustment collar to prevent the
collar from loosening during operation.
Figure 15. Suspension Adjustment
A. Front Shock Adjustment Collar
A. Front Shock Adjustment Collar
A