Troy-Bilt 460 사용자 설명서

The blade control is attached to the upper handle of the mower. 
Depress and squeeze it against the upper handle to operate the 
unit. Release it to stop engine and blade.

This blade control is a safety device. 

Never attempt to bypass its operations.

The drive control is located on the underside of the upper handle 
and is used to engage the drive. Squeeze it against the upper 
handle to engage the drive; release it to slow down or stop 
mower from propelling.

One adjustment lever is located on each wheel and is used to 
adjust the cutting height. All four levers have to be at the same 
relative position to ensure a uniform cut.

The mulch plug is used for mulching purposes. Instead of 
collecting the grass clippings in a grass catcher or using the 
side discharge chute, some mower models have the option 
of recirculating the clippings back to the lawn. This is called 
mulching.

Your mower is shipped as a mulcher. To discharge the grass 
clippings to the side instead, follow the instructions in the 
Assembly & Set-Up section to attach the side discharge chute.

Keep hands and feet away from the 

chute area on cutting deck. Refer to warning label 
on the unit.

The recoil starter is attached to the right upper handle. Stand 
behind the unit and pull the recoil starter rope to start the unit.