Troy-Bilt N779Pony 사용자 설명서

11

The throttle control lever is 
located on the right side of 
the tractor’s dash panel. This 
lever controls the speed of 
the engine and, when 
pushed all the way forward, 
the choke control also. When 
set in a given position, the 
throttle will maintain a 
uniform engine speed. 

 When operating the tractor with the cutting 

deck engaged, be certain that the throttle lever is 
always in the FAST (rabbit) position.

Moving the throttle lever all the way forward activates 
the engine’s choke control. Activating the choke control 
closes the choke plate on the carburetor and aids in 
starting the engine. Refer to Starting The Engine on page 
14 of this manual for detailed starting instructions.

The speed control lever, located on 
the left side of the tractor’s dash 
console, allows you to regulate the 
ground speed of the lawn tractor. To 
use, depress the clutch-brake pedal 
and move the lever out of the parking 
brake notch and forward to increase 
the tractor’s ground speed. When a 
desired speed has been reached, 
release the lever into an appropriate 
notch to maintain that speed. 
To slow the tractor’s ground speed, 
depress the clutch-brake pedal and 
move the speed control lever 

rearward and release it into a notch. 

The clutch-brake pedal is located on the left side of the 
lawn tractor, along the running board. Depress the 
clutch-brake pedal part way down when slowing the 
tractor by changing speeds (Refer to Speed Control Lever). 
Depress the pedal all the way down to engage the disc 
brake and bring the tractor to a complete stop.

engine. Refer to Safety Interlock Switches on page 13.

To set the parking brake, fully depress the clutch-brake 
pedal. Move the speed control lever all the way down 
and into the parking brake position. Release the clutch-
brake pedal to allow the parking brake to engage.

To release the parking brake, depress the clutch-brake 
pedal and move the speed control lever out of the 
notches to the desired position. Release the speed 
control lever and the clutch-brake pedal.

 Always set the parking brake when 

leaving the tractor unattended.

The shift lever is located on the left side of the fender 
and has three positions, FORWARD, NEUTRAL and 
REVERSE. The brake pedal must be depressed and 
the tractor must not be in motion when the moving shift 
lever. See Figure 6.

 Never force the shift lever. Doing so may 

result in serious damage to the tractor’s transmission.

Shift Knob