Alamo 02983328C 사용자 설명서

AXTREME   03/09

Operation Section 3-51

©2009 Alamo Group Inc.

Before transporting tractor between locations, idle

the tractor engine, disengage the attached head,

and wait for all head motion to come to a complete

stop.  Place the boom in its storage cradle rest

support and then turn the joystick master switch to

the OFF position.   

•

Placing Boom Articulating Arm on Boom Arm 
Rest

•

Extend the dipper section approximately half 
way out.

•

Bring the Lift to its full height and carefully 
swing the boom back until it is just positioned 
over the Boom Rest.  NOTE:  There is a formed 
“V” plate on the boom arm that fits onto the 
boom arm rest.

•

Lower the boom arm until this “V” rest on the 
Boom Rest.

•

Place the Master Switch in to the OFF position.

The boom is now in the transport position. To

remove the boom from the Boom Rest, pull the Lift

back and raise the boom about 6 inches. Then

Swing the boom around to the desired position.

ON-OFF Switch

Never allow children or other persons to ride on the Tractor or Implement.

Falling off can result in serious injury or death.  

(SG-10)