Poulan 20112X92E0 사용자 설명서
3
IMPORTANT: This cutting machine is
capable of amputating hands and feet and
throwing objects. Failure to observe the
following safety instructions could result in
serious injury or death.
capable of amputating hands and feet and
throwing objects. Failure to observe the
following safety instructions could result in
serious injury or death.
Look for this symbol to point out
im por tant safety precautions. It means
CAU TION!!! BECOME ALERT!!!
YOUR SAFE TY IS INVOLVED.
CAU TION!!! BECOME ALERT!!!
YOUR SAFE TY IS INVOLVED.
WARNING: In order to prevent ac ci den tal
starting when setting up, trans port ing, ad-
just ing or making repairs, always dis con nect
spark plug wire and place wire where it can not
come in contact with plug.
just ing or making repairs, always dis con nect
spark plug wire and place wire where it can not
come in contact with plug.
WARNING: Engine exhaust, some of its
constituents, and certain vehicle com po -
nents contain or emit chem i cals known to
the State of Cal i for nia to cause can cer and
birth defects or oth er re pro duc tive harm.
nents contain or emit chem i cals known to
the State of Cal i for nia to cause can cer and
birth defects or oth er re pro duc tive harm.
WARNING: Battery posts, terminals and
related accessories contain lead and lead
compounds, chemicals known to the State
of Cal i for nia to cause can cer and birth
defects or oth er re pro duc tive harm. Wash
hands after handling.
compounds, chemicals known to the State
of Cal i for nia to cause can cer and birth
defects or oth er re pro duc tive harm. Wash
hands after handling.
CAUTION: Muffl er and
other engine parts become
extremely hot during oper-
ation and remain hot after
engine has stopped. To avoid
severe burns on contact,
stay away from these areas.
extremely hot during oper-
ation and remain hot after
engine has stopped. To avoid
severe burns on contact,
stay away from these areas.
SAFETY RULES
I. GENERAL OPERATION
• Read, understand, and follow all
in struc tions on the machine and in the
manual(s) before starting. Be thor ough ly
familiar with the controls and the proper
use of the machine before starting.
manual(s) before starting. Be thor ough ly
familiar with the controls and the proper
use of the machine before starting.
• Do not put hands or feet near or under
rotating parts. Keep clear of the dis-
charge opening at all times.
charge opening at all times.
• Only allow responsible individuals, who
are familiar with the in struc tions, to
operate the machine.
operate the machine.
• Clear the area of objects such as rocks,
toys, wire, bones, sticks, etc., which
could be picked up and thrown by blade.
could be picked up and thrown by blade.
• Be sure the area is clear of other people
before mowing. Stop ma chine if anyone
enters the area.
enters the area.
• Do not operate the mower when bare-
foot or wearing open sandals. Al ways
wear substantial foot wear.
wear substantial foot wear.
• Do not pull mower backwards unless
absolutely nec es sary. Always look down
and behind before and while moving
backwards.
and behind before and while moving
backwards.
• Never direct discharged material toward
anyone. Avoid discharging material against
a wall or obstruction. Material may richo-
chet back toward the operator. Stop the
blade when crossing gravel surfaces.
a wall or obstruction. Material may richo-
chet back toward the operator. Stop the
blade when crossing gravel surfaces.
• Do not operate the mower without
proper guards, plates, grass catcher or
oth er safety protective devices in place.
oth er safety protective devices in place.
This instruction book is written for a person
with some mechanical ability. Like most ser-
vice books, not all the steps are described.
Steps on how to loosen or tighten fasten-
ers are steps anyone can follow with some
mechanical ability. Read and follow these
instructions before you use the unit.
Know your product: If you understand the
unit and how the unit operates, you will get the
best performance. As you read this manual,
compare the illustrations to the unit. Learn
the location and the function of the controls.
To help prevent an accident, follow the oper-
ating instructions and the safety rules. Keep
this manual for future reference.
IMPORTANT: Many units are not assembled
and are sold in cartons. It is the responsibility
of the owner to make sure the assembly in-
structions in the manual are exactly followed.
Other units are purchased in assembled
condition. On assembled units, it is the re-
sponsibility of the owner to make sure the
with some mechanical ability. Like most ser-
vice books, not all the steps are described.
Steps on how to loosen or tighten fasten-
ers are steps anyone can follow with some
mechanical ability. Read and follow these
instructions before you use the unit.
Know your product: If you understand the
unit and how the unit operates, you will get the
best performance. As you read this manual,
compare the illustrations to the unit. Learn
the location and the function of the controls.
To help prevent an accident, follow the oper-
ating instructions and the safety rules. Keep
this manual for future reference.
IMPORTANT: Many units are not assembled
and are sold in cartons. It is the responsibility
of the owner to make sure the assembly in-
structions in the manual are exactly followed.
Other units are purchased in assembled
condition. On assembled units, it is the re-
sponsibility of the owner to make sure the
OWNER'S INFORMATION
unit is correctly assembled. The owner must
carefully check the unit according to the in-
structions in this manual before it is fi rst used.
carefully check the unit according to the in-
structions in this manual before it is fi rst used.
RESPONSIBILITY OF THE OWNER
The responsibility of the owner is to
follow the instructions below.
1. Carefully read and follow the rules for
follow the instructions below.
1. Carefully read and follow the rules for
safe operation.
2. Follow all the assembly and prepara-
tion instructions.
3. Inspect the unit.
4. Make sure that the operator of the unit
4. Make sure that the operator of the unit
knows how to correctly use all stan-
dard and accessory equipment.
dard and accessory equipment.
5. Operate the unit only with guards,
shields, and other safety items in place
and working correctly.
and working correctly.
6. Correctly adjust the unit.
7. Service the unit only with authorized or
7. Service the unit only with authorized or
approved replacement parts.
8. Complete all maintenance on the unit.