Gravely 915168 - ZT34 CARB 사용자 설명서
EN - 14
CONTROLS AND FEATURES
See Figure 4 for all controls and features
locations.
locations.
Safety Interlock System
Perform the following tests to ensure the
safety interlock system is working properly. If
the unit does not perform as stated contact
your Gravely dealer for repairs.
safety interlock system is working properly. If
the unit does not perform as stated contact
your Gravely dealer for repairs.
Ignition Switch
Operate ignition switch
with a removable key.
Ignition switch has three
positions: Stop (1),
Run (2), Start (3). See
"STARTING AND
SHUTTING OFF
ENGINE" on page 18 for
detailed instructions on
how to start engine.
with a removable key.
Ignition switch has three
positions: Stop (1),
Run (2), Start (3). See
"STARTING AND
SHUTTING OFF
ENGINE" on page 18 for
detailed instructions on
how to start engine.
Throttle/Choke Lever
(915148, 150, 170, 178, 180)
Choke (1) – Use to start a cold
engine. Pull lever up for choke.
Push lever down once unit is
started.
engine. Pull lever up for choke.
Push lever down once unit is
started.
Fast (2) – Increases engine
speed.
speed.
Slow (3) – Decreases engine
speed.
speed.
OPERATION
WARNING: AVOID INJURY.
Read and understand the entire
Safety section before proceeding.
Read and understand the entire
Safety section before proceeding.
WARNING: Safety interlock failure
and improper operation of unit can
result in death or serious injury.
Check system before each use to
make sure it is functioning
properly.
and improper operation of unit can
result in death or serious injury.
Check system before each use to
make sure it is functioning
properly.
Test
Steering Lever
PTO
Parking Brake
Engine
1
Neutral Position
Off
Engaged
Starts
2
Neutral Position
On
Engaged
Doesn’t Start
3
Neutral Position
Off
Disengaged
Doesn’t Start
4*+
Out of Neutral Position
Off
Disengaged
Shuts Off
5*+
Neutral Position
On
Engaged
Shuts Off
* Test with engine running.
+ Operator lifts off seat.
+ Operator lifts off seat.
2
3
1