Husqvarna LZF6127 사용자 설명서

LUBRICATION

English

-56

Steering Control Shafts
Tip the driver’s seat.

Lubricate with a grease gun, one zerk for each 

steering control shaft, until the grease is forced out.

Use only good quality molybdenum disulphide grease.

Grease from well-known brand names (petrochemical 

companies, etc.) usually maintains a good quality.

Mower Deck Struts
Lubricate with a grease gun, one zerk for each strut, 

until the grease is forced out.

Use only good quality molybdenum disulphide grease.
Grease from well-known brand names (petrochemical 

companies, etc.) usually maintains a good quality.

8011-578

8011-577-1

Changing the Oil Filter
1.  Drain the engine oil in accordance with the 

work description under the heading “Engine  

Oil/Change Engine Oil”. 

2.  Remove the oil filter. If necessary, use a filter 

remover.

3.  Wipe new, clean engine oil onto the seal for 

the new filter.

4.  Mount the filter by hand with a ¾ turn.
5.  Run the engine warm, then check that there 

are no leaks around the oil filter seal.

6.  Check the oil level in the engine, top up 

if necessary. The oil filter holds 0.2 qt.  

(0.2 liters) of oil.

8011-745