Dixon 966985401 사용자 설명서
oPeRAtIon
27
8050-135
Turn to START position
8050-136
Release ignition to the RUN position
8050-010
Open the fuel valve
Open the fuel valve.
Press in and turn the ignition key to the start position
When the engine starts, immediately release the
ignition key back to the run position.
ignition key back to the run position.
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
approximately 10 seconds before retrying.
each time. If the engine does not start, wait
approximately 10 seconds before retrying.
Slowly slide the choke control back to the OFF
position when the engine has started.
Set the desired engine speed with the throttle. Allow
the engine to run at a moderate speed, “half throttle”
for 3-5 minutes before loading it to heavily. USE FULL
THROTTLE WHEN MOWING (no choke).
position when the engine has started.
Set the desired engine speed with the throttle. Allow
the engine to run at a moderate speed, “half throttle”
for 3-5 minutes before loading it to heavily. USE FULL
THROTTLE WHEN MOWING (no choke).