Tanaka TLE-550 사용자 설명서

 

 

 
www.tanakapowerequipment.com                             3                                              custsvc@tanaka-ism.com 

1. BEFORE OPERATION 
a.  Dress properly, do not wear loose clothing that could 

become caught in moving parts of unit. Always wear 

safety footwear and pants that cover your logs. 
b.  Protect your head (eyes and ears), hands and feet 

with safety hat, goggles, ear covers and gloves. 
c.  Do not use the unit on graveled surfaces. 
d.  IMPORTANT: A DUST FILTER MASK SHOULD BE 

WORN WHILE CUTTING ON A DUSTY SURFACES. 
e.  Inspect entire unit for loose, missing or damaged 

parts. 
f.  The operator must know and obey local regulations of 

the operating area. 
g.  Never direct discharge of material toward bystanders 

or allow anyone near area of operation. Use care in 

directing   discharge to avoid glass enclosures, 

automobiles, etc. 
h.  Stay alert for uneven sidewalks, holes in terrain or 
other unstable conditions when using unit. Always push 

machine slowly over rough ground. 
i.  Objects struck by the cutting blade can cause injury. 

The lawn should always be carefully examined and clear 

of all objects prior to edging or trimming. If the blade 

strikes a foreign object, follow these steps: 

1.  Stop engine by turning off stop switch.  
2.  Check if blade is completely stopped. 
3.  Inspect for damage.  
4.  Repair any damage before restarting and 

operating the unit. 

j.  Take all possible precautions when leaving the unit 
unattended, such as stopping engine. 
k. Never operate unit without guards, plates or other 

protective device in place. 
l. Use only accessories and attachments supplied or 

specifically recommended by TANAKA.  
m. Do not operate unit with a damaged or excessively 
worn cutting blade. 
n. If unit vibrates abnormally, immediately stop engine 

and check for cause. Vibration is generally a warning of 

trouble. 
o. WARNING : OPERATE THE UNIT FROM POSITION 

WHERE GUARDS BLOCK THE LINE OF SIGHT TO THE 
CUTTING BLADE. 

p. Use edger properly. Use only for edging the type of 

grass and other growth for which the machine is 

designed. Do not abuse engine. 
WARNING: Keep hands and feet away from 

operation. 
2. FUEL 
a. Fuel for this engine requires a mix of regular gasoline 

and Tanaka brand 2-cycle oil. Never operate the engine 
with unmixed or straight gasoline. 
b. CAUTION : FAILURE TO USE A GASOLINE: OIL FUEL 

MIXTURE WILL RESULT IN SEVERE DAMAGE TO THE 

ENGINE. DO NOT USE GASOLINE CONTAINING 

ALCOHOL OR GASOHOL. 
c. Do not smoke or allow a flame to come close while 

mixing fuel, adding fuel or maintaining the unit. 
d. Do not add fuel while engine is running. 
e. After filling fuel replace cap tightly. 
f. Take care not to spill fuel when filling. If so, wipe it up 

immediately. 
3. DURING OPERATION 
a. The unit should only be operated in a well ventilated 

area. 
b. Keep work area clear of all persons, particularly small 

children and pets. 
c. While cutting, hold unit firmly with both hands and 
stand with your feet and body well balanced. 
d. Do not carry or attempt to make any adjustments 

while engine is running. (Except where specifically 

recommended in these instructions.) 
e. Do not operate the unit at full throttle unless it is 

cutting.

 

 

4. AFTER OPERATION 
a. Stop engine and drain fuel before inspecting or 

maintaining unit. 

b. Clean unit thoroughly, removing all dust that may 

have collected. 

c. Store unit in a cool and dry place. 

d. CAUTION : CUTTING BLADE CONTINUES TO TURN 
FOR A SHORT TIME AFTER THE ENGINE HAS BEEN 

STOPPED. MAKE SURE THAT THE BLADE IS 

DISENGAGED AND HAS STOPPED COMPLETELY BEFORE 

ADJUSTING OR MAINTAINING THE UNIT.