Wagner SprayTech 558025 사용자 설명서

 10 

ProSpray 3.34

Starting operation 

  1.  Immerse the suction tube (Fig. 7, Item 1) and return hose (2) 

into a container with a suitable cleaning agent.

  2.  Turn the pressure control knob counterclockwise (3) to 

minimum pressure.

  3.  Open the relief valve (4), valve position PRIME 
   (k circulation).
  4.  Switch the unit (5) ON.
  5.  Wait until the cleaning agent exudes from the return hose.
 6.  Close the relief valve, valve position SPRAY (p spray).
  7.  Pull the trigger of the spray gun.
  8.  Spray the cleaning agent from the unit into an open collecting 

container.

  1.  Immerse the suction tube (Fig. 7, Item 1) and return hose (2) 

into the coating material container.

  2.  Turn the pressure control knob counterclockwise (3) to 

minimum pressure.

  3.  Open the relief valve (4), valve position PRIME 
   (k circulation).
  4.  Switch the unit (5) ON.
  5.  Wait until the coating material exudes from the return hose.
 6.  Close the relief valve, valve position SPRAY (p spray).
  7.  Trigger the spray gun several times and spray into a collecting 

container until the coating material exits the spray gun 

without interruption.

  8.  Increase the pressure by slowly turning up the pressure 

control knob.

 

  Check the spray pattern and increase the pressure until the 

atomization is correct.

 

  Always turn the pressure control knob to the lowest setting 

with good atomization.

  9.  The unit is ready to spray.

The Digital Electronic Spray Control (DESC) increases the functionality 

of the sprayer.  It is installed directly below the pressure control 

knob on the control panel.  It consists of a display and four function 

keys.  The display shows various menu screens that allow the user to 

customize and monitor sprayer operation using the function keys.

SET MPa

23.0

ACTUAL MPa

22.5

Display

Function

Keys

The function keys are numbered 1–4.  Each key is labeled with an 

additional function as well.  
#1/Menu Key
Pressing the #1 key scrolls through the available menu screens or 

performs a function described on the active menu screen.
#2/

g Key

Pressing the #2 key performs a function described on the active menu 

screen or increases a value.
#3/

h Key 

Pressing the #3 key performs a function described on the active menu 

screen or decrease a value.
#4/Select Key
Pressing the #4 key selects the active menu screen or performs a 

function described on the active menu screen.

Several menu screens are available for the user to customize and

monitor sprayer operation. They include Main Screen, Volume

Pumped, Job Volume, Unit Serial #, Timers, Job Timers, Service Time,

Security Code, Prime, and Rapid Clean.

SET MPa

23.0

ACTUAL MPa

22.5

The Main Screen is the default screen for 

the control system at sprayer startup.  

of measure.  Press the #1 key to scroll through the remaining menu 

screens.