Black Box MPSH16-D20-120V 사용자 설명서

 

•  Command Echo:  Enables or Disables command echo at the Setup Port.  When 

disabled, commands that are sent to the Setup Port will still be invoked, but the 

actual keystrokes will not be displayed on your monitor.  (Default = On.)

•  Accept Break:  Determines whether the port will accept breaks received from 

the attached device.  When enabled, breaks received at the port will be passed to 

any port that this port is connected to.  When disabled, breaks will be refused at 

this port.  (Default = On.)

•  Port Name:  Allows you to assign a name to the Setup Port.  

(Default = undefined.)

•  Port Mode:  The operation mode for this port.  (Default = Normal Mode)

  Depending on the Port Mode selected, the Outlet Managed PDU will display 

additional prompts listed below.  In the Text Interface, these parameters are 

accessible via a submenu, which will only be active when the appropriate port 

mode is selected.  In the Web Browser Interface, fields will be "grayed out" 

unless the corresponding port mode is selected.



  Normal Mode:  Allows communication with a local PC and permits access 

to command mode.  When the Normal Mode is selected, the following mode-

specific parameter can also be defined:



  DTR Output:  Determines how DTR will react when the port 

disconnects.  DTR can be held low, held high, or pulsed for 0.5 seconds 

and then held high. (Default = Pulse.)